5 Litre ROOF Bitumen Primer

£9.9
FREE Shipping

5 Litre ROOF Bitumen Primer

5 Litre ROOF Bitumen Primer

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

There are low-quality products on the construction market that are produced with deviations from technology. As a result, the primer dries for a long time or does not set at all. The surface remains damp, unsuitable for adhering to the following materials. On metal surfaces, special store-bought products are used to remove bitumen. The drugs are sold in bottles or in the form of sprays, they do not leave marks. Bitumen primer manufacturers molten resin is mixed into a container with gasoline in small portions (if you add it immediately, the gasoline will ignite); The first method is to soak a brush or roller in a solution and roll it out on a plane. Otherwise, the solution is poured from the container onto the surface in small portions at some distance. After that, the tool is leveled with a tool until the entire area is completely covered. By definition, a primer comes first and serves as a base for what should follow — whether it’s attending the primary grades at the beginning of school, priming an engine to start or using a primer coat applied prior to painting a wall. Similarly in commercial roofing, a primer is used as the first step in the application of a roof coating or membrane to aid in the proper bonding of the product to the surface.

Bitumen Primer | Bitumen Primer Waterproofing | Drainage

ASTM D41, 2005 Edition, February 1, 2005 – Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing If the pollution happened recently and the soil has not frozen, you can do without chemistry. It is necessary to remove the substance with a scraper, then rinse with soapy water. You can use a thinner white spirit, gasoline. A layer of primer on the surface facilitates roof waterproofing work. Self-adhesive and weld-on coatings are better glued to the processed plane. Structure The primer contains no toxic substances

Approximately 3-­6 hours depending on drying conditions. May be extended for heavy coatings or in cold weather. If on the old roof there was roofing material with fine-grained dressing, up to 1 kg of soil will go per square. Reduce consumption by thoroughly cleaning the surface of the roof or walls from dust and dirt. The layer of debris absorbs the agent, therefore the penetration depth decreases and the consumption increases. Preparation for use All surfaces must be structurally sound, clean, dry and free from surface contaminants such as grease, rust and dirt. If necessary, remove any organic growth i.e. moss or lichen, with a fungicidal wash. On bare metal a rust inhibiting product, such as red oxide or zinc phosphate should be applied and allowed to harden. Bituminous the primer without polymer and emulsion additives contains only resin and organic thinners. It is suitable for all types of roofing and other works. The integrity and effectiveness of subsequent layers depends on the quality of the first priming. The surface is cleaned of debris, in the rainy season remove moisture from the roof. A bitumen-based primer will harden and adhere to a wet roof, but it is better if there is less free moisture. Cleaning touches the snow, ice.

IKOpro Quick Dry Bitumen Primer - IKO Group

There are no other inclusions or inhomogeneous impurities; toxic substances, for example, toluene, are not used for manufacturing.The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. There is no need to choose between the two materials as they complement each other. After priming the base, you can apply a mastic for gluing the reinforcing glass fabric. Varieties of bituminous primers Emulsion the solution is distinguished by a low degree of ignition; it is used near sources of open fire. For roofing use bituminous and emulsion-bituminous primers. Impregnation is applied directly to the prepared base to strengthen the top layer. During the drying process, the particles push moisture out of the pores and fill the gaps. After hardening, the plane of the slope does not absorb moisture, it is ready for applying mastic and gluing a reinforcing mesh. Apply by brush or roller. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2­-3 hours before continuing with further work.

Safety Data Sheet - Bond It

There are special varieties for different materials, the composition is selected taking into account the adhesion of the upper layers of the surfaces to be joined. Roofing This specification covers asphaltic primer suitable for use with asphalt in roofing, dampproofing, and waterproofing below or above ground level, for application to concrete, masonry, metal, and asphalt surfaces.Petroleum bitumen melt at temperatures above 75 - 90 ° C, therefore, they are confidently used in areas with hot summers. Bitumen is a mixture of air-blown tar with the residue of viscous crude asphalt oil or heavy distillate.

Bostik Flashband Primer Black 500ml - Screwfix Bostik Flashband Primer Black 500ml - Screwfix

The soil is applied in any weather, limitation for use is surface moisture more than 15%. It is difficult to apply the solution on vertical walls and other planes, since it flows down. Unleaded gasoline does not contain lead additives, which ensures its environmental friendliness. In Russia, only such types are sold at gas stations. Terms of use Surface moisture should not exceed 15%

Our approvals

If the construction or finishing conditions do not require the use of a highly specialized composition, a universal version of a bituminous liquid is used. The primer is ideal for low pitched roofs, road construction and underground applications. If the primer is used for gluing layers of material, wait for the first layer to dry for 4 - 5 hours, then apply a layer of glue. the top layer of the treated surface is reinforced base for the subsequent laying of the finishing or intermediate layer; bitumen is melted in a container with a blowtorch or on a furnace until it turns into a liquid state;



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop