Aico EI3024

Product Information

All Aico alarms have a date-code label on the side of them which tells you exactly when the alarm was made and also the recommended replacement date. The Ei3024 is fitted with a large central Test/ Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm/ system to be silenced in the case of a false/ nuisance alarm and low battery/ fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.

Ei3024 Mains Multi-Sensor Heat and Smoke + Lithium Back Up Ei3024 Mains Multi-Sensor Heat and Smoke + Lithium Back Up

If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm. This is relevant for the 140RC Series alarms. The four-digit code shows you the year and week that the alarm was made. The first two digits relate to the year and the second two digits relate to the week.

We’re Here To Help

You will know when you need to change the battery, as you will hear a single regular beep (low battery warning) coming from the alarm, however it is recommended that you change the battery every year. If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident. Insert a flat headed screwdriver into the removal slot of the alarm. This is marked with an arrow. Make sure you keep the screwdriver horizontal (i.e. parallel to the ceiling). Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection.

Ei3024 Multi-Sensor Fire Alarm with Heat and Optical Smoke Aico Ei3024 Multi-Sensor Fire Alarm with Heat and Optical Smoke

This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. If you are using an Alarm Controller Ei450 this will continue for as long as you hold down the ‘Test’ button. The Ei3024 can operate as a standalone Alarm or can be interconnected either by hard-wire or wirelessly (using the EI3000MRF module) enabling it to communicate with compatible Ei Alarms and accessories. Up to 20 devices can be interconnected.

The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED). Find the alarm with the red light rapidly flashing. Press its ‘Hush’ button to silence. If that does not silence it, clean the alarm using a vacuum. Wait for 10 minutes and the issue should be resolved.